Incl. VATExcl. VAT

Category: News

New Robe Spikie Washbeams have arrived

Posted on by stageadmin

The Robe Spikie LED WashBeam is a small, super fast LED WashBeam, which utilises a single 60W RGBW light source with a specially designed 110mm wide front lens producing a solid beam. The fixture quickly zooms from a soft wide 28° wash to a tight sharp-edged 4° beam or one of two new stunning air effects.

The new Robe Spikie LED WashBeam innovative Flower Effect creates sharp multicoloured spikes of light, rotating in both directions at variable speed. Additionally, a unique Beam Effect Engine transforms the output into a dynamic ray of three narrow beams, creating another new visual effect to the show.

The Continuous rotation of pan and tilt gives new dynamic elements across the stage.

The super strong light-output can be maximised by using ROBE‘s unique HotSpot Control system together with the linear iris to create very powerful beam effects. An innovative patented cooling system ensures the best lamp operating temperatures and allows DMX controlled noise reduction. Users have complete control of all features of this fixture, making it ideal for environments where noise levels are critical and light output requirements are high.

Robe Spikie Specification
  • Robe Spikie Washbeam SOURCE
    • Light source: 60W RGBW LED
    • LED life expectancy: min. 20.000 hrs
    • Typical lumen maintenance: 70% @ 20.000 hrs
  • Robe Spikie Washbeam OPTICAL SYSTEM
    • Robe’s proprietary optical design
    • High – efficiency zoom optical system, ratio 7:1
    • Zoom range: 4° – 28°
    • Output lens diameter: 110 mm
    • Fixture total lumen output: 920 lm
    • Light output: 9.270 lx @ 5m 
  • Robe Spikie Washbeam ELECTROMECHANICAL EFFECTS
    • Colour mixing mode RGBW or CMY
    • Variable CTO: 2.700K – 8.000K
    • Virtual Colour Wheel: with 66 preset swatches
    • Tungsten lamp effect at whites: 2.700 K and 3.200 K (red shift and thermal delay)
    • Colour rainbow effect with variable speed
    • MCFE™ – Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patent pending)
    • Prism: 3-facet circular rotating prism
    • Motorized zoom
    • Shutter: Electronic with variable speed strobe (max.20 flashes per second)
    • Pre-programmed random strobe & pulse effects
    • High resolution electronic dimming: 0 – 100% 
  • Robe Spikie Washbeam CONTROL AND PROGRAMMING
    • Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 3 editable programs (each up to 25 steps)
    • Protocols: USITT DMX-512, RDM
    • Wireless CRMX™ technology from Lumen Radio
    • DMX Protocol modes: 2
    • Control channels: 27, 21
    • Pan/Tilt resolution: 16 bit
    • RGBW or CMY: 8 or 16 bit
    • Zoom: 8 or 16 bit
    • Dimmer: 8 or 16 bit (internal 18 bit) 
  • Robe Spikie Washbeam MOVEMENT
    • Pan movement range 360° with continuous rotation control
    • Tilt movement range 360° with continuous rotation control
    • Movement control: Standard and Speed
    • Controllable speed of Pan/Tilt movement
    • Automatic Pan/Tilt position correction 
  • Robe Spikie Washbeam THERMAL SPECIFICATION
    • Maximum ambient temperature: 45 °C (104 °F)
    • Maximum surface temperature: 80 °C (176 °F)
    • Minimum operating temperature: -5°C (23°F) 
  • Robe Spikie Washbeam ELECTRICAL SPECIFICATION AND CONNECTIONS
    • Power supply: Electronic auto-ranging
    • Input voltage range: 100-240 V, 50/60 Hz
    • Power consumption: Max. 100 W at 230 V / 50 Hz
    • Power in/out connector: Neutrik powerCON TRUE1 in/out
    • DMX and RDM data in/out: Locking 5-pin XLR
  • Robe Spikie Washbeam APPROVALS
    • CE compliant
    • cETLus compliant 
  • Robe Spikie Washbeam MECHANICAL SPECIFICATION
    • Height: 408 mm (16.1″) – head in vertical position
    • Width: 277 mm (10.9″)
    • Depth: 147 mm (5.8″)
    • Weight: 7.3 kg (16.1 lbs)
    • Ingress protection rating: IP20
  • Robe Spikie Washbeam RIGGING
    • Mounting positions: Horizontally or vertically
    • Universal operating position
    • Mounting points: 1 pair of 1/4-turn locking points
    • 1x Omega adaptor with 1/4-turn quick locks
    • Safety cable attachment point

To see the other Robe Moving Heads we hold in hire stock please click here

Manufacturer: Robe

Genie SLA20 Superlift now in Hire

Posted on by stageadmin

We have recently added a pair of Genie SLA20 Superlifts to our hire stock. 

The Genie SLA20 Superlift has a load capacity of 363kg and a lifting height of 21 ft 2.5 in (6.46 m). 

The Genie SLA20 Superlift legs fold up allowing for easy storage and loading.

For more information on hiring a Genie SLA20 please contact us

For more features and technical information please view the Genielift website

New Milos MR0 Sloping Roof Canopy Stage in stock

Posted on by stageadmin

We have just added a Milos MR0 sloping roof canopy stage to our hire stock. 

The Milos MR0 measures 8m x 6m. Like our Milos MR1 canopy and Milos Mini MR1, the Milos MR0 requires a water ballast system. We will provide the water ballast tanks but it is the clients responsibility to provide the water. 

This Milos MR0 Canopy Stage requires about 4-5 hours to build depending on site conditions and any technical requirements. 

Please contact us if you would like a competitive quote on this outdoor canopy or if you just require more information about this product.

To see more information and features of the Milos MR0 Sloping Roof Canopy please visit the Milos website

Dirty Rigger 4 in 1 Podger now Available To Buy

Posted on by stageadmin

Dirty Rigger 4 in 1 Podger now in stock

A solid steel frame, coated with a Nickel Chrome plating for outstanding durability. 

The Dirty Rigger® Podger Ratchet offers 4 socket sizes including 17,19,21 & 24mm and comes complete with an integrated and rated safety bond for safer working at height.

Fully compatible with Dirty Rigger’s tool lanyards, the Podger is an essential piece of equipment for any rigger.

– 4 Socket Sizes: 17,19,21,24mm

– 24cm short handle design

– Nickel Chrome plated finish

– Pointed end handle, ideal for knocking out truss pins

You can purchase this product in the Sales section of our website or view the other Dirty Rigger products we stock here

To view more features and specifications of the Dirty Rigger 4 in 1 Podger please click here

Zero88 Solution Now In Hire

Posted on by stageadmin

The Zero88 Solution is a fully featured, comprehensive and robust lighting console built on the high performance ZerOS operating software platform. The Zero88 Solution offers simple hands on control of conventional generic and moving light parameters across 248 devices and 2048 channels with submaster and cue stack control.

ZerOS’ powerful effects system can be relied upon to deliver truly unique effects, from simple chases to rainbows and fly-ins. Manipulate colour, beam and position with offset and rotation parameters to create almost limitless effect pallets.

Networking, external touchscreen and multimedia support combined with multi functional keys, offline editing and a comprehensive fixture library, completes an outstanding control package for the more demanding rental and multi-purpose user.

Zero88 Solution Features
  • 248 devices
  • USB support for show files storage and touchscreen
  • 4 universe optically isolated DMX outputs, or Art-Net and sACN
  • ZerOS Operating Software
  • Colour Picker
  • 8 LCDs
  • RDM Ready
  • Optional hardware upgrade enables SMPTE/MIDI/ChilliNet and Remote Switches
  • Zero88 Solution has a Comprehensive effects system
  • Submaster playback faders with scenes or chases
  • Support for iOS®, AndroidTM, Windows Mobile and Windows
  • PC remote displays
  • Fixture Library with over 3000 types
  • Shows cross loadable with other ZerOS consoles and importable from original Frog Series
  • Cue stack (Playback X) playback for full theatrical playback

For more information from the Zero88 Solution product page click here

For more information on hiring this product or any others, please get in touch

Another ETC Gio in Hire

Posted on by stageadmin

We’re pleased to announce we have added Another ETC Gio with 3072 channels to our hire stock. and will be hiring it out for £475+vat per week (discounts availble for long term hires)

The ETC Gio has a fast, accessible control surface, with an easy-to-navigate backlit keypad. It includes two integral, articulating multi-touch displays and supports up to three external monitors, all of which can also be multi-touch.

The ETC Gio can integrate into an Eos Ti, Eos® or Ion® system with ease, acting as a primary, backup or client console in combination with the rest of the family. All of the accessories available for Ti, Eos and Ion service the ETC Gio as well. And the keypad layout is virtually identical to Ti, making moving between platforms a snap.

The ETC Product Features
  • From 2,048 to 32,768 outputs with no co-processing. (Ours has 3072) 
  • Dedicated master-playback fader pair
  • 10 definable motorized faders, with 30 pages of control
  • 8 user-definable buttons
  • Four pageable haptic encoders
  • Two integral articulating 12.1″ LCD multi-touch displays.
  • Supports three external high resolution DVI/SVGA monitors; can be single- or multi-touch
  • Three user-definable workspaces per monitor, each with discrete split-screen controls and frame management. Additionally, single- or multiple-screen snapshots allow instant reconfiguration.
  • Custom-design your control interface using Magic Sheets, with topographical or abstract layouts. Full interaction with the command line allows command instructions – from the simplest and most immediate to the most complex – accessed from a mouse or single- or multi-touch displays.
  • Configure and program a pixel-map layout, using integral or custom-designed content.
  • Device discovery and troubleshooting via RDM
  • ETC Sensor® CEM+, CEM3™ and FDX dimmer feedback and controls
  • ETCNet3™ (ACN- based), ETCNet2™, Artnet and Avab® UPD protocol output
  • Integrated keyboard drawer with USB ports
  • Backlit keyboard
  • Multiple MIDI and SMPTE Inputs
  • OSC and UDP String support
  • Client/server networking and synchronized backup
  • Client and Offline programming on PC (Windows 7 or 8) and native on Macintosh (Intel only, OS X), via Nomad™
  • Data-laundering from Obsession™, Express™, Expression®, Emphasis®, Congo®, Cobalt™, Transtechnik NT, Avab VLC, Grand MA1 and Strand 500/300 series show files.
  • 12 discrete online users with partitioned control

To see more information and features of the ETC Gio click here

For more hire information about the ETC Gio or other consoles we stock please contact us

ETC Gio Now For Hire

Posted on by stageadmin

We’re pleased to announce we have added the ETC Gio with 3072 channels to our hire stock. and will be hiring it out for £475+vat per week (discounts available for long term hires)

The ETC Gio has a fast, accessible control surface, with an easy-to-navigate backlit keypad. It includes two integral, articulating multi-touch displays and supports up to three external monitors, all of which can also be multi-touch.

The ETC Gio can integrate into an Eos Ti, Eos® or Ion® system with ease, acting as a primary, backup or client console in combination with the rest of the family. All of the accessories available for Ti, Eos and Ion service the ETC Gio as well. And the keypad layout is virtually identical to Ti, making moving between platforms a snap.

The ETC Product Features
  • From 2,048 to 32,768 outputs with no co-processing. (Ours has 3072) 
  • Dedicated master-playback fader pair
  • 10 definable motorized faders, with 30 pages of control
  • 8 user-definable buttons
  • Four pageable haptic encoders
  • Two integral articulating 12.1″ LCD multi-touch displays.
  • Supports three external high resolution DVI/SVGA monitors; can be single- or multi-touch
  • Three user-definable workspaces per monitor, each with discrete split-screen controls and frame management. Additionally, single- or multiple-screen snapshots allow instant reconfiguration.
  • Custom-design your control interface using Magic Sheets, with topographical or abstract layouts. Full interaction with the command line allows command instructions – from the simplest and most immediate to the most complex – accessed from a mouse or single- or multi-touch displays.
  • Configure and program a pixel-map layout, using integral or custom-designed content.
  • Device discovery and troubleshooting via RDM
  • ETC Sensor® CEM+, CEM3™ and FDX dimmer feedback and controls
  • ETCNet3™ (ACN- based), ETCNet2™, Artnet and Avab® UPD protocol output
  • Integrated keyboard drawer with USB ports
  • Backlit keyboard
  • Multiple MIDI and SMPTE Inputs
  • OSC and UDP String support
  • Client/server networking and synchronized backup
  • Client and Offline programming on PC (Windows 7 or 8) and native on Macintosh (Intel only, OS X), via Nomad™
  • Data-laundering from Obsession™, Express™, Expression®, Emphasis®, Congo®, Cobalt™, Transtechnik NT, Avab VLC, Grand MA1 and Strand 500/300 series show files.
  • 12 discrete online users with partitioned control

To see more information and features of the ETC Gio click here

For more hire information about the ETC Gio or other consoles we stock please contact us

Avolites Tiger Touch 2 Now For Hire

Posted on by stageadmin

We have recently added a pair of Avolites Tiger Touch 2 consoles into our hire stock.

Avolites Tiger Touch 2

The third generation Tiger Touch boasts a 100% brighter screen, a front panel loading USB and a harmonious panel button layout. The button layout now allows users to use the familiar layout from the Titan Mobile all the way to the Sapphire touch.

Consistency throughout the Titan range of consoles offers users an easier path. When programming on a Tiger Touch II and then operating a Sapphire Touch. The Tiger Touch II supersedes the Tiger Touch Pro and original Tiger Touch 

The Avolites Tiger Touch 2 represents the perfect combination of maximum power and small size. Small and light enough to fly in standard hold luggage, even in a suitcase if necessary, but with enough power for large complex shows.

With 20 submasters separately paged as two banks of 10 and a further 10 macro or executer buttons. You have at your fingertips instant hands on control, harnessing the power of the Titan operating system.

Outputting up to 16 individual DMX universes, and with expandability to 64 DMX universes using TitanNet, you will not be short of control channels.

Titan software is a superbly flexible console operating system designed and developed by Avolites. Titan gives you the ability to get a show on with the minimum of pre programming.

The Avolites Tiger Touch 2 is based around a large touch screen with high quality switches, encoders and faders. And the ability to utilise a second outboard screen or touch screen.

For more information on the Avolites Tiger Touch 2 please visit the Avolites website

Viper S and Viper 2.6 Smoke Machines For Hire

Posted on by stageadmin

We have added a quantity of Look Solutions Viper S and Viper 2.6 smoke machines to our hire stock.

The Look Solutions Viper S smoke machine is the smallest of the Viper range with its 650w output but has all the same features of the bigger Viper NT and 2.6

The look Solutions Viper 2.6 is the largest of the viper range with its 2300w output.

The main features of the Look Solutions Viper S, Viper NT and Viper 2.6:

DMX as standard, analog and stand-alone-mode
Powerful output
Internal timer
Fog output adjustable in steps of 1% (0 – 99%)
Continuous output
Easy handling

Power outputs are 
Viper S – 650 Watts
Viper NT – 1300 Watts
Viper 2.6 – 2300 Watts

For hire information of these products please click here or contact us

For more features and specifications of the Viper range please follow the Look Solutions products link

Pulsar ChromaFlood 200 Tri Colour LED Fixtures In Hire

Posted on by stageadmin

We now have a quantity of Pulsar ChromaFlood 200 Tri Colour LED Fixtures for hire. The Pulsar ChromaFlood 200 Tri Colour LED fixture is super high-powered. Features 66 3W LEDs with a maximum power consumption of 200 watts.

The ChromaFlood has been designed for both architecture and entertainment, giving unparalleled light output that can enhance many things including building facades, water features and monuments to name a few.

The Pulsar ChromaFlood 200 provides stunning calibrated, flicker-free colour for shows, concerts and themed environments. It produces mixed colour within the unit, therefore eliminating multicoloured sources and shadows.

The ChromaFlood 200 is also IP66 rated and suitable for both indoor and outdoor use.

  • High-power LED fixture housed in a compact IP66 flood enclosure
  • Powered directly from 100-277 Volts AC
  • 200 Watt mains powered super high output LED luminaire designed for architectural and entertainment applications
  • Choice of 7 LED populations, from single colour to our flagship TriColour technology colour RGB mixing LED devices
  • Full remote DMX control of RGB levels to allow endless colour mixing
  • LCD menu system for quick fixture configuration
  • Internal sequences provide for operation without a separate control system
  • Optional interchangeable lens plates for change between 8˚, 25˚

Manufacturer: Pulsar

For more information on the hire of the Pulsar ChromaFlood 200 Tri please get in touch